GuangDong Heng AnShun Electrical Power Equipment Service Co., Ltd.
Strive to establish leadership in China's electric power equipment industry.
Add to Cart
Smart Motor Battery Charger 260W Manual Adjustable AGM Jump Starter Portable Car Battery Charger with Silver Color
Product Description:
Pulse battery charger is our factory according to the lead-acid batteries, maintenance-free batteries, starter batteries lithium batteries, such as 12V/24V/60V/72V batteries and professional design and production.
It adopts special intelligent microcomputer chip to control the whole process with advanced pulse width modulation technology. It has the advantages of small size, safe and convenient, high conversion efficiency, stable output current, large design capacity and long time full load operation. It is a new generation of environmentally friendly charger.
The charger has short circuit protection, reverse connection protection, overheating protection and low voltage protection. It can realize constant current, constant voltage, float charging and trickle charging state. Improve battery life. Reduce the battery water loss rate and eliminate the battery charging heat, charging drum.
Feature:
1. Multi-function charger is widely used in 12v/24v battery, it can identify different kind of batteries in automatically
2. Multi-function charger Use the advanced pulse width modulation technology with three-stage battery charge in automatic function
3. Microcomputer power chip digital pulse restore to improving the battery life greatly.
4. With multiple protection.
5. Output short circuit protection & Overheating protect & Reverse connecting protection & Over current protection & Full charging automatic shutdown protection
6. Intelligent charge and fast charge for opton
7. With Digital LED Display window show the charge voltage/Current
Advantage:
Smart mode:
When the user uses it for the first time, make sure that the switch is adjusted to the smart gear for charging. D uring the charging process, the charging current is automatically adjusted according to the battery size and battery status, and the charging is automatically stopped after charging to the set voltage value. This gear is full of self-stops.
Repair Mode:
Only the battery is below 11V voltage, this manual mode is for the battery internal resistance characteristics, professionally designed charging program, help repairing the battery function, so that the battery effect plays better, but the repair mode work must be carried out under manual care, in the battery shell has a slight heat when the repair is stopped. The notification repair time can be up to 1-2hours.
Attention:
1.Proper cooling fan operation: It is crucial to ensure that the cooling fan of the charger is functioning properly while charging the battery. The cooling fan helps dissipate heat generated during the charging process, preventing overheating and ensuring the charger's optimal performance.
2.Prohibited modes during lithium battery charging: To prevent damage to the lithium battery with different voltage values, it is important to avoid using other charging modes intended for different battery types. For a 12V lithium battery, the full charge voltage should be around 12.6V±0.2V, while a 24V lithium battery requires a full charge voltage of approximately 25.2V±0.2V.
3.Voltage identification display range: The charger has a voltage identification display range to indicate the voltage of the battery being charged. In the 12V mode, the charger can identify and display voltages within the range of 10V-15V, while in the 24V mode, it can identify and display voltages within the range of 20V-29V.
4.Manual monitoring for certain batteries: It is recommended to manually monitor the first charge of a leakage battery and batteries below 20AH. During this initial charging process, it is important to visually inspect the battery's appearance and the battery liquid to avoid overcharging and deformation of the drum. This manual monitoring helps ensure the battery's safety and integrity during charging.
Safety Tips:
To better maintain your battery, it is recommended not to fully discharge it before recharging. Lead-acid batteries do not have a memory effect, so diligent charging and discharging are suitable. Charging a lead-acid battery when its power is depleted below 10V can cause significant damage to the battery and may trigger overcurrent protection on the charger. If this happens, you can turn off the power for ten minutes before resuming use. However, it's important to note that when the battery voltage is as low as 10V, it is in a severely depleted state. Please be mindful of the battery's condition in the future to ensure its longevity.
Technical Parameters:
1.Rated input voltage range: 110V-250V; This indicates that the power supply or charger can accept input voltages within the range of 110 volts to 250 volts.
2.Output voltage: 12V/24V;The power supply or charger can provide two different output voltage options, either 12 volts or 24 volts.
3.Rated operating frequency: 50/60Hz;This means that the power supply or charger can operate on both 50 Hz and 60 Hz frequency power sources.
4.Full load conversion efficiency: 93%;This indicates that the power supply or charger has an efficiency of 93% when operating at full load. In other words, it can convert input power to the output power with a minimum energy loss.
5.Operating temperature range: -30°C to 45°C;The power supply or charger is designed to operate within the temperature range of -30 degrees Celsius to 45 degrees Celsius. It can function properly within this temperature range without any significant issues.
6.Charging mode: The charging mode is described as "No load - constant current-constant pressure - float charge - trickle." This suggests that the power supply or charger follows a specific charging algorithm or sequence. It starts with a no-load condition, then applies a constant current to charge the battery until it reaches a certain voltage (constant pressure). Once the battery voltage reaches the desired level, it switches to a float charge mode to maintain the battery at a specific voltage. Finally, it enters the trickle charge mode, which provides a low current to compensate for any self-discharge of the battery.
battery and all connections. (Please contact customer service in time)
FAQ:
Q: Why is the current getting smaller and smaller?The current is not 30A.
A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.
The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.
Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.
The pulse is designed to better protect the battery from being injured due to overcharge.
Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.
Q: Are 12V/24V and lithium battery automatically compatible?
A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)
Q: How to operate?
A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.
The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.
Q:What is the differences between chargers?
A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.
Q: What is the function of the charger?
A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.
Q: Why can't the battery reach the current you said?
A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.
P.S. Most of the batteries that need to be recharged with chargers have some problems
Q: Why cant the two 12V series connection recognize 24V for charging?
A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately
Q: Why does the display screen not light after plugging in?
A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective
1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken
